3Com Corporation
NDIS 2.01 Drivers Installation Notes

DEC Pathworks for DOS/Windows v4.1 (below)
DEC Pathworks for DOS/Windows  v5.1  


DEC PATHWORKS for DOS/Windows v5.1
=====================================


These instructions describe how to install the 3Com NDIS driver 
for the DEC Pathworks network operating system.  These 
instructions assume the DEC Pathworks for DOS/Windows 
software has been installed on the hard drive from the
installation diskettes or CD ROM. Refer to the DEC manual for 
installation instructions if the software has not been installed.
Refer to the DEC manual for templates and options.  


Note:  Please read the WFW.TXT file on the EtherDisk if 
       installing Pathworks with WFW  v3.11. 

       Please run AutoLink on the EtherDisk if installing
       Pathworks with Retail NetWare or Netware with ODI 
       drivers. 

1.  Go to the drive where Pathworks software is installed. 

2.  Change directory to PCAPP.

3.  Execute PWSETUP.

4.  Enter the directory where you want the software installed. 
          The default is C:\PW. 

5.  Choose CUSTOMIZE under the Select A Configuration Option 
    menu.

6.  Choose a template in the Select a Workstation Template 
    menu.

7.  Under the Customize: Modify Workstation Configuration menu,
    put an X mark besides the Network Adapter Information 
    line.

8.  Additional menus will appear, choose the appropriate 
    options for your network environment. Refer to the DEC 
    manual if there are questions regarding these menus.

9.  Choose <Other Network Adapter> under the 
    Customize: Network Adapter Information menu.

10. If installing options other than Retail NetWare or Netware
    with ODI drivers: 

    Type a:\mslanman.dos\drivers\ethernet\elpc3\elpc3.dos on 
    the Driver File: line.

    Type a:\mslanman.dos\drivers\ethernet\elpc3\protocol.ini on
    the PROTOCOL.INI Stub: line.

11. Verify that (l) Ethernet is marked and click on OK.

12. Click on OK under the  Customize: Network Adapter 
    Information menu.

13. Additional menus will appear, follow the DEC instructions 
    to complete the installation.

14. Reboot the system.





DEC PATHWORKS for DOS/Windows v4.1
=====================================


To install DEC PATHWORKS version 4.1 on a DOS NDIS 
workstation, DOS must be installed on the target workstation C:
drive, or you must have a bootable DOS floppy.  Follow these 
steps:

1. Insert the PATHWORKS DOS Client Setup diskette version 4.1 
   in your floppy drive.

2. Change to that drive and execute the NETSETUP.EXE program.

3. Follow the screens to select a Transport Protocol.

4. Insert the appropriate diskettes for the selection 
   you made in step 3.

5. Select your network adapter by typing ETHERNET.
 
6. Select the option (OTHER NDIS) adapters.

7. When prompted for the DRIVE:\PATH\FILENAME for the NDIS 
   driver, type:

		A:\MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3\ELPC3.DOS

8. When prompted for the full DRIVE:\PATH of the PROTOCOL.INI
   fragment, type:

		A:\ MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3\PROTOCOL.INI

9. Follow the rest of the installation screens and the 
   procedure for writing the KEY DISK.

   The NETSETUP program will build the PROTOCOL.INI file for 
   you and modify your startup files to use the adapter you
   have selected.



 NOTE:  You must add the /N parameter to the line in the 
        STARTNET.BAT file. That starts the network scheduler.

        For example:

           %BOOT%\DECNET\sch /h /n


=========================================================


(%VER NDIS - DEC PATHWORKS v3.1c)